Filter
Top Products
11
Note: This section describes the terminal mode. To operate
in the PS·Data mode, refer to p. 35.
■ On-screen Display (OSD)
Control
The procedure described below lets you determine the dis-
play parameters, such as camera title, clock and status, on
and off on the active monitor screen.
Before controlling each item, monitor selection is neces-
sary. (Refer to p. 3 Monitor Selection.)
● Displaying Each Item
1. Press the MENU button repeatedly until "OSD On/Off"
appears on the LCD.
2. Perform desired operations.
q Displaying the clock
Toggle the F1 button.
(1) will appear/disappear on/from the active moni-
tor.
w Displaying the camera title
Toggle the F2 button.
(2) will appear/disappear on/from the active moni-
tor.
e Displaying the event
Toggle the F3 button.
(3) will appear/disappear on/from the active moni-
tor.
r Displaying the monitor status*
Toggle the F4 button.
(4)* will appear/disappear on/from the active moni-
tor.
*Monitor number, system controller name, tour num-
ber and recorder number
3. To exit the mode, press the MON (ESC) button.
● Displaying All the Items
1. Perform Step 1 of Displaying Each Item.
2. Hold down the SHIFT button.
The LCD display will become as follows.
3. Press the F1 button.
(1), (2), (3), and (4) will appear/disappear on/from the
active monitor.
■ On-screen Display (OSD)
Position Control
The procedure described below lets you determine the dis-
play positions, such as camera title, clock and status, on
the active monitor screen.
● Moving Each Item
1. Press the MENU button repeatedly until "OSD Position"
appears on the LCD.
MONITOR DISPLAY CONTROL
08/21/2002 12:50:28 PM
M1 K1 T01
C01 camera title ALARM10*
(1)
(3)
(4)
(2)
OSD On/Off 002
Clock Cam Event Mon
08/21/2002 12:50:59 PM
M1 K1 T01
C01 camera title ALARM10*
Camera title
Monitor status
Event
Clock
OSD Position 003
Clock Cam Event Mon
OSD Position 003
All