Filter
Top Products
94
■
Cable Compensation/VD2/DATA
This window configures the following parameters of each
camera: the cable length for transmission loss compensa-
tion and whether to send the VD2 timing pulse or control
data with the camera output signals.
● How to Display
To display this window, click on the (Cable
Compensation/VD2) button in the main window (p. 80).
● Parameters
Cable Comp: Select the cable length for each camera.
S: Less than 400 m (1 300 ft)
M: 400 m (1 300 ft) to 700 m (2 300 ft)
L: 700 m (2 300 ft) to 900 m (3 000 ft)
VD2: To send the VD2 timing pulse with the camera
output signal, select ON.
Not send the VD2 timing pulse with the camera out-
put signal, select OFF.
DATA: To send the control data with the camera output
signal, select ON.
Not send the control data with the camera output
signal, select OFF.
(Save Exit) button
Saves the configuration and closes the Cable
Compensation/VD2/DATA window.
(Cancel Exit) button
Cancels the configuration and closes the Cable
Compensation/VD2/DATA window.
■ Camera Title
This window configures the title for each camera.
Up to 20 characters (camera title + alphanumeric charac-
ters) are available for the title.
WJ-SX150A Administrator Console has the following built-in
characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789!"#$%&'()*+,–./:;
,=/?•_ÄÜÖÆÑÂØäüöæñâøÁÇÉÌÒÙßàáâçèéêëìíîïòóôùúû
In addition, symbols, special characters and original char-
acters are editable in the bitmap font.
● How to Display
To display this window, click on the (Camera Title)
button in the main window (p. 80).
● Parameters
• Drop-down menu
Camera channel and logical camera number are displayed
here. Select a desired camera.
• Fixed Font Box
The fixed-font characters are displayed here.
SPACE: To make a space in the text-box area, click on
this button.
• User Font Box
The character displayed here is editable by users.
Edit Font: To display the Edit Font window, click on this
button.
• Insert / Revise Radio button
To insert a character in the text-box area, click on the Insert
button. To revise the character there, click on the Revise
button.
(Save Exit) button
Saves the configuration and closes the Camera Title win-
dow.
Note: Be sure to click on this button after editing user font
characters. Otherwise, the edited characters will be
canceled.
Camera
title input
area