Filter
Top Products
- App.39 -
Appendixes
Connector for Monitor
1) Part No.DV0P2880
2) Components
3) Pin alignment of connector for CN MON
<Notes>
1.The table above shows the pins alignment, looking from the connector pin
inserted direction of connector. Make sure of the pin numbers marked on the
plug itself for actual connection so that wiring is done correctly.
2.
For wiring and connection, refer to "Main circuits" in "System Configuration and Wiring" (page 22).
Item
Connector (3P)
Connector pin
Manufacturer's Part No.
51004-0300
50011-8100
Quantity
1
3
Manufacturer
Molex
Incorporated
Remarks
For CN MON
(3 pin)
1
SP
2
IM
3
GND
1) Part No. DV0P2870
2) Components
3) Pin alignment of the connector for CN POWER connector
<Notes>
1. The table above shows the pins alignment, looking from the terminal inserted
direction of the receptacle. Make sure of the pin numbers marked on the
plug itself for actual connection so that wiring is done correctly.
2. For wiring and connection, refer to "Main circuits" in "System Configuration
and Wiring" (page 22).
3. Never connect anything to the pins where (NC) is written on the table above.
Item
Manufacturer's Part No.
Quantity Manufacturer
Remarks
Connector (10-pin)
5557-10R-210 1 Molex
POWER connector
Connector pin
5556PBTL 4
Incorporated
(10-pin)
Connector Kits for Power Source for Amplifier
6
L3
1
E
7
(NC)
2
(NC)
8
L2
3
B
9
(NC)
4
(NC)
10
L1
5
P
4)
Recommended manual press fitting tools
(Customers are requested to prepare these
tools for themselves.)
Product No. 57032-5000 Molex Incorporated
4)
Recommended manual
press fitting tools (Custom-
ers are requested to
prepare these tools for
themselves.)