Filter
Top Products
- 42 -
Installing PANATERM
“
on a hard disc
<Notes>
1. The memory capacity of the hard disc should be 15MB or more. Prepare OS of Windows
“
95
or Windows
“
98.
2. Install PANATERM
“
with setup discs, otherwise the software does not work.
Procedure
1)
Turn on your personal computer. Start Windows
“
95 (or 98).
(If there is any application program on, close all of them.)
2) Insert the PANATERM
“
setup floppy disk in the floppy disk drive.
3) Start Explorer, and switch (select) to the floppy disk drive. (For the procedure for starting the Explorer program,
see the instructions for Windows
“
.)
4) Double click on the setup program (Setup. exe) in the floppy disk. (PANATERM
“
setup program will start.)
5) Click on to start the setup program.
6) Keep the operation according to the guide of the setup program.
(When indication to replace the setup disk appears, follow this instruction.)
7) Click on Start installing? to start the setup routine.
8) Confirm an message "Setup completed". Then click on .
9) Close all the applications. Then restart Windows
“
. PANATERM
“
will be added to the program menu when
restarted.
Setting the Parameters
OK
OK