Panasonic 8410 Printer User Manual


 
61
Main Menu
Using the Printer
Menu Mode
The Menu mode includes a Main menu, Item menu, Selection 1 menu and Selection
2 menu which can be changed from the printer panel.
When Ready is displayed in the upper line of the LCD, pressing the MENU/EXIT
button will allow you to enter the Menu mode.
Once in the Menu mode:
BPress the F/CONTINUE button to:
Display the next menu.
Display the next item.
Increase the numerical value of the selection by 1 or display the next selection.
BPress the I/CANCEL button to:
Display the previous menu.
Display the previous item.
Decrease the numerical value of the selection by 1 or display the next selection.
BPress the ENTER button to:
Enter a sub - menu.
Activate a selection.
Print a Configuration/Maintenance/Color Calibration Page.
Before you attempt to change any settings, check the factory default settings in the
following table. For details on changing the settings, refer to Outline for Operation
(P. 64).
Once you have changed the printer panel settings, they are automatically saved as
user default settings even if the power is turned off.
Item Menu
Test Page
Selection 2 MenuSelection 1 Menu
Configuration Page
Calibration Offset
CYAN
MAGENTA
YELLOW
BLACK
Calibration Test Print
Reset Calibration
0*
1
(-5 to 5)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
YES
NO
Color Calibration
(continued)
*
1
Factory default setting
Maintenance Page
CYAN
MAGENTA
YELLOW
BLACK