Filter
Top Products
59
Setup
If you wish to adjust the density for all colors simultaneously,
perform the following, then go to step 5.
# Repeat instructions # through % of step 1 on page 56.
$ Press the ENTER button.
% Press the F/I button to darken/lighten all the colors.
Pressing the F/I button twice selects the next/previous level settings.
(For example:)
BIf you wish to make the density setting darker by 2 levels:
Press the F button 4 times.
BIf you wish to make the density setting lighter by 1 level:
Press the I button 2 times.
& Press the ENTER button.
' Press the F button 4 times and the following is displayed.
Color Calibration
Calibration Offset
Calibration Offset
0* (-5 to 5)
Color Calibration
CYAN
Color Calibration
Calibration Test Print
4
A