Filter
Top Products
124
READY indicator is
blinking.
The toner is almost
depleted.
Read the printer panel
message to determine
the printer status.
Corrective ActionTrouble
ERROR indicator is
blinking.
Wait for the job to be
completed or cancel the
job.
The printer is receiving,
processing or printing
job.
Possible Cause
Exit the Menu mode by
pressing the MENU/EXIT
button.
Correct the condition
displayed on the printer
panel (e.g., close the
door or clear the media
jam).
Turn the printer off and
back on again. If the
indicator is still on, the
printer requires service.
You have entered the
Menu mode in the printer
panel.
The printer is not ready,
is disabled, or has
detected an error.
The printer has stopped
because it detected a
user-correctable error
such as an open door or
a media jam.
Error occurred that is not
user-correctable.
READY indicator is off.
ERROR indicator is on.
Replace the color toner
cartridge.
On the Maintenance
Page, a single color is
not uniform or many
vertical streaks (both
light and dark) of slightly
different density and
non-uniform color.
Care and Maintenance
Troubleshooting
Store media in the
original, dust-free
package in the same
environmental conditions
as the printer.
Paper doesn’t match the
environmental conditions,
or it has too much
moisture.
Try fresh paper, or
another type of paper.
On the Maintenance
Page, half tone area has
areas of weak color.