Filter
Top Products
150
Confirm that the SCSI
board is correctly installed
in the computer and it is
set correctly. (Refer to the
manual of the SCSI
board.)
For any other trouble
related to SCSI, refer to
the SCSI section of Care
and Maintenance
( ☞ P. 134).
SCSI board is not set
correctly.
Unavailable LPT port is
selected when using
Windows 3.1.
There isn’t available
LPT Port.
Error message Possible cause Recovery
Care and Maintenance
SCSI device can not be
used. Because ASPI dll
file is not exist or
doesn’t match.
SCSI board is not
installed correctly in
the computer and/or it
is not set correctly.
This ASPI manager
does not support this
mode of Windows. You
typically see this error
code when running
Windows in Real Mode
SCSI board is not set
correctly.
Restart Windows in
Enhanced mode.
Select an available LPT
port by following the
procedure below.
1. Double click the Main
icon.
2. Double click the Control
Panel icon.
3. Double click the Printers
icon.
4. Click Connect... .
5. Click the other port, then
click OK.
6. Click Close.
One or more ASPI for
DOS managers are
loaded which do not
support ASPI for Win16
or 32.
Correctly set the SCSI
board in the computer.
(Refer to the manual of the
SCSI board.)
For any other trouble
related to SCSI, refer to
the SCSI section of Care
and Maintenance
( ☞ P. 134).