Filter
Top Products
141
Turn off the printer and
the computer, then turn
them on again. Print the
document again.
SCSI Error!! Time Out
occurred.
Unable to Allocate Memory The computer’s
internal memory for
printing is insufficient.
The printer is not
responding.
Error message Possible cause Recovery
Care and Maintenance
BClose all applications
except for the one
which controls the
printer, then print
again.
BTurn off the
computer, then turn it
on again.
Printing aborted for
occurred SCSI error.
An illegal error has
occurred.
BConfirm the SCSI
board is correctly
installed in the
computer or cable is
correctly connected.
BTurn off the
computer, then turn it
on again.
Correctly install the
SCSI board and its
driver. (Refer to the
manual of the SCSI
board.)
For any other trouble
related to SCSI, refer to
the SCSI section of
Care and Maintenance
( ☞ P. 134).
SCSI board and its
driver are not installed
correctly.
No ASPI managers were
found!!
One or more ASPI for DOS
managers are loaded which
do not support ASPI for
WIN16!!
Follow the procedure
below and disable the bi-
directional interface.
1. Double-click
Status
display setup
icon in
KX-P8410 Utilities
program group.
2. Click Device tab.
3. Click off Monitor
Printer check box.
4. Click OK.
The Status Display
function becomes
ineffective.
The printer does not print
correctly (not an error
message).
The computer is not
properly communicating
with the printer.
Unable to Free Memory!! Re-boot Windows.Something happened to
the memory environment
of Windows.