Filter
Top Products
The multi-purpose tray (MPT) serves as an additional tray for loading any type of
media that ranges in size from 91 mm x 254 mm to 216 mm x 356 mm (3.6″ x 10″ to
8.5″ x 14″). Use it to load a single sheet or a stack of media. The amount of media
you can load depends upon its thickness.
Use the multi-purpose tray to accomplish the following:
Print on standard and special media
BStandard media
Laser paper [75 to 165 g/m
2
(20 to 44 lbs.)]
BSpecial media
Labels
Envelope (#10 or larger size)* [Black Text only]
Transparency (The print quality may not be stable. Use the media tray for
best reliability.)
* If the Envelope is larger than #10, you must select a paper size that is larger than
your envelope.
Two-sided printing (double-sided) on laser paper
You should not expect the same print quality and reliability that you get with one-
sided printing. For details, refer to page 166.
Setting media thickness switch
Because the printer accommodates various media weights from the multi-purpose
tray, media thickness can be manually selected for the most reliable paper-picking.
Follow these steps:
Open the left side door (#). The green media thickness switch is
located on the paper feeder and has three settings:
Move the switch to the desired setting.
Close the left side door.
Laser paper 91 to 123 g/m
2
(25 to 32 lbs.)
Transparency, Label
29
Setup
1
2
3
Thin
Middle
Thick
Loading Media in the Multi-purpose Tray