Filter
Top Products
Adjusting the Lens
If the LCD Projector is not set up so that it is horizontal, it will not be possible to obtain a distortion-free picture.
Turn the adjusters in either direction to make fine adjustments to the level of the Projector so that the Projector is
perfectly horizontal.
ZOOM Ring
FOCUS Ring
1
Turn the ZOOM Ring
to adjust the size of the picture.
For a larger picture, turn the ring to the right.
For a smaller picture, turn the ring to the left.
2
Turn the FOCUS Ring
to adjust the focus of the picture.
Turn the ring to the right or left until the picture is at the optimum focus.
3
Turn the ZOOM Ring again
to adjust the size of the picture.
When you turn the FOCUS Ring, the size of the picture changes.
Displaying the on-screen menu screens
If you want to set up the LCD Projector or adjust the projected picture, press MENU on the LCD Projector or
remote control to display the on-screen menu screens shown below.
(LCD Projector) (Remote Control)
Press MENU
when the on-screen displays disappear, and
the menu screen will be displayed as shown below.
Note:
Each press of MENU while the adjust or setup screens are
displayed, changes the screen to the previous menu
screens shown below.
RGB Input Signal
S-VIDEO/VIDEO Input Signal
PC-CARD Input Signal
13