Filter
Top Products
Setting-up Positions and Changing the Projection Method
The projection method used by the Projector can be changed in accordance
with the setting-up position. Including ceiling mounting, you may select from
four direction types. All the time of shipment from the factory, the Projector is
set to the No.1 “FLOOR/FRONT” projection method, but this can be changed
if required.
1
Press MENU
to display the menu.
2
Press
or
to select “SET UP PROJECTOR”,
and then < or >
to display the
screen.
3
Press
or
to select “SET UP DISPLAY”,
and then < or >
to display the
screen.
4
Press
or
to select “PROJECTION MODE”,
and then < or >
to select
projecting method from 1 to 4.
Select 1
FLOOR/FRONT (Factory setting)
Select 2
FLOOR/REAR (Right and Left displays in reverse)
Select 3
CEILING/FRONT (Up and Down displays in reverse)
Select 4
CEILING/REAR (Up and Down/Right and Left reverse display.)
FLOOR/FRONT mounting
CEILING/FRONT
(Factory setting)
mounting
FLOOR/REAR
mounting
CEILING/REAR
mounting
Note:
If the letter on the screen is projected inversely or upside down, you set the wrong projecting method.
Press MENU to remove the setup screen and menu.
14