Filter
Top Products
RGB Signals that can be Input
The projection mode will be matched automatically to one of the modes which have been pre-set inside the
Projector.
If a signal which differs greatly from any of the types listed below is input, the picture image may not be displayed
correctly, or a blue background may be displayed.
Display mode name
No. of dots
VGA350 (70Hz)
640 X 350
25.175
VGA400 (70Hz)
640 X 400
25.175
VGA480 (60Hz)
640 X 480
25.175
Macintosh LC
640 X 480
31.334
Macintosh 13”
640 X 480
30.241
VESA350 85Hz
640 X 350
31.500
VESA400 (85Hz)
640 X 400
31.500
VESA480 (72Hz)
640 X 480
31.500
VESA480 (75Hz)
640 X 480
31.500
VESA480 (85Hz)
640 X 480
36.000
SVGA (56Hz)
800 X 600
36.000
SVGA (60Hz)
800 X 600
40.000
SVGA 72Hz
800 X 600
50.000
SVGA (75Hz)
800 X 600
49.500
SVGA (85Hz)
800 X 600
56.250
*XGA (60Hz)
1024 X 768
65.000
*XGA (70Hz)
1024 X 768
75.000
*XGA (75Hz)
1024 X 768
78.750
*Macintosh 16”
832
X
624
57.283
*Macintosh 19”
1024 X 768
80.000
Signal
data
Horizontal frequency Vertical frequency
(kHz)
(Hz)
31.47
70.08
31.47
70.08
31.47
59.94
34.97
66.61
35.00
66.67
37.86
85.08
37.86
85.08
37.86
72.81
37.50
75.00
43.27
85.01
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75.00
53.67
85.06
48.36
60.00
56.48
70.07
60.02
75.03
49.73
74.55
60.24
74.93
Dot clock frequency
(MHz)
Blue Screen with No Input Signal
The LCD Projector is equipped with an internal Blue Screen function which
[5 Minutes before
turns the screen blue when the video or computer equipment connected to the
power is shut off.]
input jack is turned off, or when there is nothing connected to the input jack.
If the power is turned on when no input signal is input to the LCD Projector,
Power is
the screen will turn blue.
shut off.
The “FOCUS” overlay appears only until the video or computer equipment is
connected to the input jack and turned on. If no input signal is received (the
screen is blue) for 15 minutes, the lamp will turn off automatically.
Remaining time
The at right display will appear when the RGB input is within the LCD
Projectors frequency range, but is not one of the LCD Projector’s
programmed formats. (As found above.)
Should an RGB signal be input which is out of the LCD Projector’s frequency
range, no indication will be present.
16
* Changing to 800 X 600 may cause a portion of information to be omitted, or the image quality to be degraded.