Filter
Top Products
Adjusting the Picture to the Desired Setting
To obtain better picture quality, use the MODE button described on page 20 and adjust each of the selected modes
to the desired picture. The items which can be adjusted vary depending on the type of input signal. The adjustment
procedure below describes the on-screen displays when the S-VIDEO signal or the VIDEO signal is being
projected.
1
Press MENU to display the menu.
2
Press
or
to select “VIDEO ADJUST”, and then < or > to
display the screen.
(1/2) or (2/2) displayed under “VIDEO ADJUST” indicates that
the first or second of two setting screens is displayed.
3
Press
or
to select “COLOR”.
Note:
Press in the “COLOR” item or
in the “SHARPNESS” item
to display the sub color screen and image quality screen. You
can adjust the white balance in the sub color adjust screen.
(see page 22.)
You can select NATURAL or DYNAMIC image quality in the
image quality screen.
4
Press < or > to display the COLOR individual adjustment
screen.
5Press < or > to adjust the color. The current setting will be
displayed on the screen by numerals and a bar.
Note:
Adjustment
Numeric
Bar display
Depending on the adjustment item, the adjust procedure and
adjustment will vary. Please refer to the chart below.
function display
adjustment
level display
Adjustment item
COLOR
TINT
Button
Press > button.
Press < button.
Press > button.
Press < button.
Press > button.
Press < button.
Adjustment Details
Adjustment Range
Remarks
The color becomes deeper.
Max. value 30
S-VIDEO/VIDEO
The color becomes paler.
Min. value -30
only
Flesh tones become greenish.
Max. value 40
NTSC, NTSC 4.43 (S-
Flesh tones become reddish.
The screen becomes brighter.
The screen becomes darker.
The screen becomes brighter and
the picture becomes deeper.
Min. value -40
VIDEO/VIDEO) only
BRIGHTNESS
Press > button.
PICTURE
Max. value 30
Min. value -30
Max. value 30
Press < button.
The screen becomes darker and the
picture becomes paler.
Min.value -30
SHARPNESS
Press > button.
Press < button.
The picture quality becomes sharper. Max. value 20
S-VIDEO/VIDEO
The picture quality becomes softer.
Min.value -20
only
Note:
The last adjustment condition is saved and will not be erased even if the power is turned off.
Press MENU to remove the setup screen and menu.
If < and > are pressed together while the video adjust screen or individual adjustment screen is displayed, the
adjustment condition of the adjust items currently displayed on-screen will return to the factory setting.
The different adjustment condition cannot be saved for S-VIDEO and VIDEO.
21