Filter
Top Products
Projecting PC-Card (ATA Flash Card) Data
Using this software, “JPEG Viewer”, you can save the image displayed on the PC screen as a JPEG file, to a
PC-Card (ATA Flash Card). And if you insert the PC-Card into the LCD Projector, you can project using the JPEG
Image playback feature.
Please follow the below instructions to use this feature.
Note:
Some ATA Flash Cards may not work with the LCD Projector.
The following manufacturer PC-Cards have been verified compatible.
Panasonic, HITACHI, TDK, SanDisk, EPSON, Simple Technology
Projecting PC-Card Data
Follow the instructions below when projecting image data saved on a PC-Card.
(See “JPEG Viewer Feature” on pages 36 - 40.)
<LCD Projector>
1
Turn on the LCD Projector to start projecting.
(See “Turning the POWER on and off on page 9.)
POWER button/
STANDBY(R)
ON(G) Indicator
2
Insert PC-Card into PC-Card Slot on the LCD Projector.
Then, press INPUT on the LCD Projector or remote
control and select PC-CARD.
The INDEX and first image in each FOLDER are shown.
Note:
It takes a few seconds for the list of images to be displayed.
(WAIT... appears.) If you made JPEG files with something
other than JPEG Viewer, it may take a much longer time to
display the list of images.
PC-Card
MAIN Power
See ‘When using BMP or JPEG
JPEG Converter feature”, and
RELEASE
Switch
convert to JPEG files ideally suited to the LCD Projector.
Button
If you made FOLDER with something other than JPEG Viewer,
FOLDER-A, FOLDER-B,
will be displayed.
“ROOT” is displayed if images corresponding to the LCD Projector
are found in ROOT.
The screen turns blue if images corresponding to the LCD Projector
are not found in PC-Card.
When you want to eject the PC-Card, press the PC-Card RELEASE
Button. And “NO CARD” screen is displayed.
PC-Card
3
Press < or > to select FOLDER.
Press > to select the next FOLDER.
Press < to select the previous FOLDER.
The selected FOLDER is indicated by a red arrow.
The selected image in Folder is encircled by a bold, blue
frame.
Note:
Press VOLUME- to play back the first image of the selected FOLDER.
4
Press VOLUME+ to decide FOLDER.
A list of images will be displayed.
5
Press
< or > to select an image.
The selected image is encircled by a bold, blue frame, and the FOLDER
name and number is displayed.
Note:
Press
or
to change the selected FOLDER. And, press VOLUME-
to display the INDEX.
31