6 Press VOLUME+ to project the selected image.
Press < or > to project the images one by one.
> : The next image is projected.
< : The previous image is projected.
Note:
Press VOLUME- when playing back to return the screen to the list
of images.
Press VOLUME+ during playback to display the INDEX.
Press or
during playback to display the file size (ex. 800 x 600 dots),
and the operating instructions.
Press or
again to turn off the display.
When using the Repeat Play
The LCD Projector can automatically play back images one by one
in the selected Folder. And, you can select the length of time each
image is played back.
1
Press MENU to display the menu.
2
Press or
to select “REPEAT PLAY”.
3
Press
or
to select “SET UP PC-CARD”, and < or > to
display the screen.
4
Press or
repeatedly
to select the length of time
each image is played back.
Playback length of 5sec., 10sec., 30sec., 60sec., 120sec. can be
selected.
Note:
Repeat Play can only be used in the selected Folder.
You cannot select images while Repeat Play is in progress.
Follow the instructions above to select “OFF”.
And then, select an image.
Using the Fade Feature
With the Fade feature, instead of instantly changing from image to image, the previous image is gradually
darkened (FADE OUT), and the next image is gradually lightened (FADE IN).
Please follow the instructions below to use this feature.
1
Press MENU to display the menu.
2
Press
or
to select “SET UP PC-CARD”, and < or > to
display the screen.
3
Press or
to select “FADE”.
4
Press or
to select “ON”.
If you select “OFF”, the images change instantly.
(This is the factory setting.)
Note:
Press MENU to remove the setup screen and menu.
32