Filter
Top Products
Cleaning the Air Filter
Air Filter
The air filter should be cleaned about every 100 hours. Also,
clean the air filter if the “A-0” is indicated in the STATUS CODE
display.
Replace the filter when it is clogged or dirty even after cleaning.
Cleaning procedure
Tools required: Vacuum Cleaner.
Wait until the cooling fan stops and the STANDBY(R)
ON(G) indicator turns solid red.
Air Filter unit
1
Set the Main Power Switch to OFF and
unplug the power cord.
2
Place the LCD Projector up on its side as
illustrated.
3 Remove the Air Filter unit
Hold the indent on the Air Filter unit with your hands and
pull the Air Filter unit out of the LCD Projector.
4
Clean the Filter.
Gently remove any accumulated dust from Air Filter unit
with your vacuum cleaner.
CAUTION: Operating LCD Projector with torn
or damaged Filter may cause damage to LCD
Projector
5 Replace the Air Filter unit.
Slide the Air Filter unit into the LCD Projector until
hollows in the Air Filter unit are aligned with the hollows in
the Projector.
Note:
The LCD Projector power cannot be turned on unless the
Air Filter unit is correctly installed.
Crevice
Attachment
Main Power Switch
Indent
43