Filter
Top Products
18
Basic LCD Projector Operation
Turning off the Picture and Sound at the same time
When SHUTTER button is pressed on the remote control the picture and sound turns off and the screen goes black,
Press SHUTTER button again to resume picture and sound.
• When the screen goes black, the picture will not be shown on
the screen. However, the picture continues to be sent from the
Personal Computer or video source.
Black screen
(Remote Control
Unit)
Turning off the sound
If the MUTE button on the remote control is pressed, “Mute” will be displayed on the screen as shown in the illustration
below and the sound will be muted. If the MUTE button is pressed again, the normal sound volume will be restored.
• If the Power supply is turned off or either of the VOLUME +/-
buttons is pressed, the mute setting will be cancelled.
etuM
(Remote Control
Unit)
Adjusting the Volume
The volume can be adjusted using the VOLUME +/- buttons on the LCD Projector or remote control.
• The “Volume” will remain displayed on the screen for approximately
5 seconds.
(Remote Control
Unit)
(LCD Projector)
• Press VOLUME + button to turn the volume high.
• Press VOLUME - button to turn the volume low.
emuloV
42+
or
Freezing the picture
Projection can be switched between a frozen (still) picture and a moving picture each time when the FREEZE button on
the remote control is pressed. Press FREEZE button again to resume motion.
• The sound is muted while the picture frozen.
ezeerF
(Remote Control
Unit)
Note
Note
Note
Note