Filter
Top Products
49
1 Insert the carrying handle into the LCD Projector so that
the ▲ mark on the Lock Ring is aligned with RELEASE on the
LCD Projector.
Removing and Attaching the Carrying Handle
The LCD Projector Carrying Handle can be removed and
attached. When the Projector is set up so that it need not be
moved, you can improve the appearance of the Projector by
removing the handle.
Please follow the instructions below to remove and attach
the carrying handle.
When Removing the Carrying Handle
• Remove the handle while in the raised position.
Removal is difficult if in the lowered position.
1 Hold in the two lock buttons, located on the Lock Ring
at the base of the handle as shown.
When Attaching the Carrying Handle
2 Turn the Lock Ring to the left so that the ▲ mark points
to RELEASE on the LCD Projector.
3 Repeat steps 1 and 2 and remove the other Lock Ring.
4 Slowly pull the carrying handle straight out from the
LCD Projector.
2 Hold in the two lock buttons, located on the Lock Ring
at the base of the handle as shown.
3 Turn the Lock Ring to the right so the ▲ mark points to
LOCK on the LCD Projector and you hear it click into the locked
position. (The Lock Ring is locked.)
Lock Ring
Carrying Handle
• Attach the carrying handle securely. If you carry the LCD
Projector with the carrying handle improperly attached, the
handle could come off and you sometimes cause injury.
4 Repeat steps 1 and 2 and remove the other Lock Ring.
Note
Note