Filter
Top Products
29
Previous
screen
Press POWER Button on the LCD Projector or remote
control unit.
1
The power indicator will flash, then turn solid green and a
picture will be projected onto the screen.
The LCD Projector cannot be turned on for 60 seconds
after turning it off.
Turning on the power
Turning the power on and off
Note
2
Press POWER Button on the LCD Projector or remote
control unit. “Please press POWER button again to power
off.” is displayed on the screen, and then press POWER
Button again.
1
Turning off the power
3 Wait for the cooling fan to stop.
The power indicator changes to solid red, the cooling fan
stops, and the projector goes into Stand-by mode. (After
about 1 minute)
The power indicator will illuminate flashing red.
2
POWER Button
POWER Button
POWER Indicator
STANDBY(RED)
ON(GREEN)