Filter
Top Products
37
Previous
screen
Press the INPUT Button
The input source for picture signals can be changed by
pressing the INPUT Buttons on the projector operating panel
or on the remote control unit.
or
Changing the input signal
INPUT
INPUT
The signal from the source which is
connected to the RGB/YPBPR IN
connector is projected.
This terminal accepts input of RGB
input signals from a personal computer
and DTV Format signals (RGB,
YPBPR) from a DVD or a digital
broadcast. No monitor or projector can
automatically decide whether a
Component signal is the RGB-type or
the YPBPR-type. So, you will have to
select either RGB or YPBPR manually.
RGB
YP
B
P
R
S-VIDEO
VIDEO
The signal from the source which is
connected to the S-VIDEO IN
connector or VIDEO IN connector is
projected.
If cables are connected to both
connectors, the S-VIDEO signal will be
selected automatically. (The S-VIDEO
signal has priority.)
(Remote
Control unit)
(LCD Projector)
Continued on the next page...