Filter
Top Products
42
Previous
screen
When projecting RGB signal images from a personal
computer, it is possible to automatically adjust the image’s
position, dot clock and phase simultaneously (only for
projection of images with RGB signal inputs other than DTV
format signals). Perform the operation described below if you
wish to use this function.
AUTO SETUP
Press the AUTO SETUP
button on the remote control
unit.
Using the Auto Setup Feature
Auto Setup
Note
• The LCD Projector detects whether the simple stand are
down or up and automatically corrects keystone distortion.
• Adjusted settings are saved as is even if power is turned
off.
• If the edges of the projected picture are indistinct, or if a
dark picture is being projected, the automatic set up
processing may stop automatically before it is complete. If
this happens, project a different picture and then press the
AUTO SETUP Button once more. Or, perform the following
operations as indicated in the on-screen display.
Refer to the “Adjusting the Image Position, Dot Clock and
Phase”.
Refer to the “Keystone correction function”.
(Remote
Control unit)