Filter
Top Products
64
Previous
screen
• The LCD Projector power cannot be turned on unless the
Air Filter unit is correctly installed.
• Using with the air filter sponge removed will result in dirt
and dust being drawn in and lead to malfunction.
3 Clean the Filter.
Gently remove any accumulated
dust from Air Filter unit with your
vacuum cleaner.
4 Replace the Air Filter unit.
Slide the Air Filter into the LCD
Projector so that the
indentations of the filter and
projector are aligned. Then,
press on the arrow mark until
you hear it snap into place.
Note
CAUTION: Operating LCD Projector with torn or damaged
Filter may cause damage to LCD Projector.
If the dust cannot be removed by cleaning, it is time to
replace the air filter.
Cleaning the Air Filter
REMOTE