Filter
Top Products
43
Previous
screen
Adjusting the Image Position, Dot Clock and
Phase
Confirm the picture position, Dot Clock, and Phase. If the
picture is not correctly positioned within the display area of
the screen (the edge of the picture does not appear), adjust
the picture position. The items which can be adjusted will vary
depending on the type of input signal.
The procedure and on-screen display as shown below are
based on RGB as the input signal from a personal computer.
1 Press MENU to
display the menu.
2 Press or to
select
“Synchronization”,
and then ENTER to
display the screen.
3 Press or to
select “H Position”.
• When adjusting the
Vertical Position,
Dot Clock, and
Phase, move the
arrow to the item
you want to adjust.
4 Press or to adjust
the H Position setting.
• The current setting
will be displayed on
the screen by
numerals and a bar.
• When adjusting the Horizontal Position (H Position)
Picture
White Balance
Synchronization
Function
Language
Information
H Position
V Position
Dot Clock
Phase
Standard (Push ENTER)
49
27
900
15
Synchronization
Continued on the next page...