Filter
Top Products
Technical Information
106 - ENGLISH
Appendix
■■
Pin assignments and signal names
<SERIAL IN> terminal
Outside view
Pin No. Signal name Details
(1)(5)
(6)
(9)
(1) — NC
(2) TXD Transmitted data
(3) RXD Received data
(4) — NC
(5) GND Ground
(6) — NC
(7) CTS
Connected internally
(8) RTS
(9) — NC
<SERIAL OUT> terminal
Outside view
Pin No. Signal name Details
(1) (5)
(6)
(9)
(1)
— NC
(2)
RXD Received data
(3)
TXD Transmitted data
(4)
— NC
(5)
GND Ground
(6)
— NC
(7)
RTS
Connected internally
(8)
CTS
(9)
— NC
■■
Transmission conditions
Signal level RS-232C-compliant Character length 8 bit
Sync. method Asynchronous Stop bit 1 bit
Baud rate 19 200 bps
*1
X parameter None
Parity None S parameter None
*1: Fixed to 9 600 bps when [AMX D. D.] is set to on.
■■
Basic format
Transmission from the computer begins with STX, then the ID, command, parameter, and ETX are sent in this
order. Add parameters according to the details of control.
E\WHV
,'FKDUDFWHUVE\WHV
6HPLFRORQE\WH
&RORQ
E\WH
,'FKDUDFWHUV
E\WHV
3DUDPHWHU
XQGHILQHGOHQJWK
(QG
E\WH
6WDUWE\WH
==WR
,'GHVLJQDWH
*1: When sending commands without parameters, a colon (:) is not necessary.