Filter
Top Products
Maintenance/replacement
ENGLISH - 95
Maintenance
Replacing the parts
■■
Air lter
The replacement lter (Product No.: ET-RFE12) is optional. To purchase the product, consult your dealer.
■■
Replacement of the air lter
1) Slide the air lter cover.
■
z
Pull and slide the air lter cover in the direction shown by the arrow.
■
z
The top part of the air lter appears.
2) Remove the air lter.
■
z
Hold the grip of the air lter to pull up.
3) Attach a new air lter.
■
z
Insert a new air lter with its tabs facing down.
4) Slide the air lter cover to the original position.
■
z
Perform Step 1) in the reverse order.
5) Reset the lter counter.
■
z
Turn on the power and perform [Filter counter reset] in the [Setting] menu.
Attention
■
z
Make sure to turn off the power before replacing the air lter.
■
z
Before attaching a new air lter, be sure to remove the packing material of the air lter.
■
z
When attaching the unit, make sure that the projector is stable. Perform the replacement in a safe place where
the projector will not be damaged even if you drop the air lter.
■
z
When turning the projector on, make sure that the air lter is installed before using the projector. Failure to do
so may cause damage.
■
z
After replacing the air lter, reset the lter counter. Otherwise, the power of the projector may be turned off for
safety.