Filter
Top Products
Installing an input module (optional)
ENGLISH - 39
Getting Started
Installing an input module (optional)
Installing an input module
■■
Types of input modules
Purchase an input module (optional) matching the input signals of the system.
Module name SD/HD-SDI input module
Module number ET-MD16SD1
Input/output
terminal
BNC input 2 systems, BNC output 1 system
Compatible
signal format
SMPTE259M-C standard:
480-60i (59.94 Hz
*1
), 576-50i (50 Hz)
SMPTE260M standard:
1035-60i (60/59.94 Hz
*1
)
SMPTE274M standard:
1080-24psf (48/47.95 Hz
*1
), 1080-24p (24/23.98 Hz
*1
), 1080-25psf (50 Hz), 1080-25p (25
Hz), 1080-30psf (60/59.94 Hz
*1
), 1080-30p (30/29.97 Hz
*1
), 1080-50i (50 Hz), 1080-60i
(60/59.94 Hz
*1
)
SMPTE296M standard:
720-60p (60/59.94 Hz
*1
), 720-50p (50 Hz)
*1: V-sync frequency 60/59.94 Hz, 48/47.95 Hz, and 24/23.98 Hz are automatically distinguished.
Note
■
z
The preceding list shows the signal formats supported by this input module. The signal formats supported by
the projector differ depending on the model. For more information, please consult your dealer.
■■
Installation procedure
Disconnect the power before installing the input module.
1) Remove the slot cover.
Slot cover
2) Insert the input module.
■
z
Firmly insert the input module into the slot, ensuring that the socket of the connection terminal engages
correctly with the plug within the projector body.
Guide
Socket
Plug
3) Fix the input module in place using two screws.
Attention
■
z
Be sure to tighten the screws. Otherwise, the input module may fall off.
■
z
An improper installation may result in damage to the input module.