Filter
Top Products
About your projector
ENGLISH - 23
Preparation
■■
Connection terminals
(1) (2) (3) (4)
(10)
(9)
(8)
(7)
(6)
(5)
(1) DVI-D input terminal <DIGITAL IN>
This terminal is for inputting the DVI-D signal.
(2) HDMI input terminal <HDMI IN>
This terminal is for inputting the HDMI signal.
(3) Computer input terminal <ANALOG IN>
This terminal is for inputting an RGB signal.
(4) RGB 5BNC input terminal <G,B,R,H/HV,V IN>/<VIDEO
IN>/<Y,Pb/Cb,Pr/Cr IN>
This terminal is for inputting the G,B,R,H/HV,V signal,
video signal, and Y,Pb/Cb,Pr/Cr signal.
(5) USB terminal <USB>
This terminal is for use by service personnel.
(6) Serial input terminal <SERIAL IN>
This input terminal is compatible with RS-232C and for
externally controlling the projector by connecting the
projector.
(7) Serial output terminal <SERIAL OUT>
This terminal is for outputting the signal connected to the
serial input terminal.
(8) Wired remote control terminal <REMOTE IN>
This terminal is for connecting the remote control cable
when using the remote control as a wired remote control.
(9) LAN terminal <LAN>
This terminal is for connecting the projector to the network.
(10) S-VIDEO input terminal <S-VIDEO IN>
This terminal is for inputting S-video signals.
Attention
■
z
Make sure to connect the LAN cable to the indoor equipment.