Filter
Top Products
Attaching the lens
ENGLISH - 25
Getting Started
Attaching the lens
Notes on attaching the lens
Before putting the projector in position, attach the lens to the projector body.
First, determine the lens according to the operating environment for the projector.
For lens product numbers suitable for the projector and lens specications, consult your dealer. When attaching
or replacing a lens, consult the technical staff or service personnel at a specialist dealer for safety. Do not attempt
to attach or replace the lens by yourself.
■
z
Use the light-shielding plates, lens attachment, spacer, and lens lock lever xing bracket supplied with the
projector when attaching the lens. For details, refer to “Accessories” (
page 17).
Caution
When setting up the projector after attaching the lens, be sure to t the lens cover to the lens. When carrying
or holding the projector body, never hold the lens. Doing so may damage the projector.
Available lens
The following optional lenses are available. Check the lens specications and use an appropriate lens. (
page 33)
Lens Model No. Type Focus Zoom
ET-ELW02 Wide zoom lens Motor driven Motor driven
ET-ELW03 Fixed short-focus lens Manual Fixed
ET-ELW04 Wide zoom lens Motor driven Motor driven
ET-ELW06 Wide zoom lens Motor driven Motor driven
ET-ELS02 Standard zoom lens Motor driven Motor driven
ET-ELS03 Standard zoom lens Motor driven Motor driven
ET-ELT02 Long zoom lens Motor driven Motor driven
ET-ELT03 Long zoom lens Manual Manual
ET-ELM01 Long zoom lens Motor driven Motor driven