Filter
Top Products
Asynchronous Terminal Interface Operation
G-113163-A2-GB20-10 March 1999
Setting a Password
In addition to establishing access security on a port
(refer to the previous section, Establishing Access
Security on a Port), the password itself is set. Unless you
specify otherwise, the password is null.
" Procedure
To set a password:
1. From the Main Menu screen, select Control.
The Control screen appears.
2. From the Control screen, select Administer
Password.
The Password Entry screen appears (Figure G-9).
This screen is used to add a new password or
modify an existing password.
3. Enter a new password in the Password field.
The password may be 1 to 8 characters long and
may contain the characters 0 through 9, a
through z, and/or A through Z.
4. Use the Re-Enter Password field to verify the new
password.
5. Select Save.
Once a password is saved, the Login Records Saved
message appears at the bottom of the screen.
main/control/admin_password
Customer ID: Node A Model: 3163
PASSWORD ENTRY
Password:
Re-Enter Password:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
S
ave
Enter New
Password
Re-Enter
Password
Save
Password
Figure G-9. Setting a Password