Filter
Top Products
ACCULINK 3163 DSU/CSU
C-20 March 1999 3163-A2-GB20-10
Table C-8
(2 of 3)
Management Configuration Options
Com Link: PPP
Next PPP SLIP Prev
Com Port Link Layer Protocol. Specifies the link layer protocol for the communication port if the Com Use configuration
option is set to Mgmt.
PPP – Specifies PPP as the link layer protocol for the IP management link on the communication port.
SLIP – Specifies SLIP as the link layer protocol for the IP management link on the communication port. The
communication port must be configured for asynchronous operation to support SLIP.
Modem IP Adr:
Next Edit Clear Prev
Modem Port IP Address. Specifies the IP address for the modem port if the Modem Use configuration option is set to
Mgmt.
Edit – Allows you to edit or display the IP address for the modem port.
Clear – Allows you to clear the IP address for the modem port. The IP address is set to 000.000.000.000.
Mdm NetMask:
Next Edit Clear Prev
Subnet Mask for the Modem Port. Specifies the Subnet Mask for the modem port if the Modem Use configuration option
is set to Mgmt.
Edit – Allows you to edit and/or display the Subnet Mask for the modem port.
Clear – Allows you to clear the Subnet Mask for the modem port. The Subnet Mask is set to 000.000.000.000. If the
Subnet Mask is 000.000.000.000, the IP protocol creates a default Subnet Mask based on the class of the IP address
(Class A: 255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).
Alt Mdm IP Adr:
Next Edit Clear Prev
Alternate Modem Port IP Address. Specifies the alternate IP address for the modem port if the Modem Use configuration
option is set to Mgmt. This IP address is needed if a call attempt does not complete on the primary alarm phone number
(contained in the alarm directory) and the alternate dial out directory is used to try another phone number.
Edit – Allows you to edit or display the alternate IP address for the modem port.
Clear – Allows you to clear the alternate IP address for the modem port. The IP address is set to 000.000.000.000.
Alt Mdm NetMask:
Next Edit Clear Prev
Alternate Subnet Mask for the Modem Port. Specifies the alternate Subnet Mask for the modem port if the Modem Use
configuration option is set to Mgmt. This Subnet Mask is needed if a call attempt does not complete on the primary alarm
phone number (contained in the alarm directory) and the alternate dial-out directory is used to try another phone number.
If this configuration option contains a non-zero Subnet Mask, it is used as the Subnet Mask for the modem port if a call is
completed to the alternate phone number.
Edit – Allows you to edit and/or display the alternate Subnet Mask for the modem port.
Clear – Allows you to clear the alternate Subnet Mask for the modem port. The Subnet Mask is set to 000.000.000.000. If
the Subnet Mask is 000.000.000.000, the IP protocol creates a default Subnet Mask based on the class of the IP address
(Class A: 255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).