Filter
Top Products
Configuration Options
C-93163-A2-GB20-10 March 1999
Channel Configuration
Options
Table C-4
(1 of 2)
Data Port Channel Configuration Options
Channel Config:
Dsply Clear Prt1
NOTE: The configuration options described in this table are made available by selecting Prt1 from the Channel
Config screen.
Data Port Channel. Allows the assignment of a particular port to DS0 channels on the network interface.
Assign By: Block
Next Block ACAMI Chan Prev
Data Port Channel Allocation Method. If NET or DTE is selected using the Assign To configuration option, this
configuration option designates the method for assigning DS0 channels to the destination T1 interface.
Block – Allocates DS0 channels to this port by the block method.
ACAMI – Allocates DS0 channels to this port by the Alternate Channel Alternate Mark Inversion method. The difference
between block and ACAMI is that the number of channels allocated with ACAMI is double the number needed for the port
rate. With ACAMI, every alternate DS0 channel does not carry data from the port but always transmits and receives all
ones.
Chan – Allocates DS0 channels to this port by the individual channel method.
NOTE: Changing this configuration option from one method to another (Block, ACAMI, or Chan) deallocates all DS0
channels assigned to the network interface.
Port Rate: 384
Next 64 128 192 256 320 384 448 512 576 640 704 768 832 896 960 1024 1088
1152 1216 1280 1344 1408 1472 1536 Prev
OR
Next 56 112 168 224 280 336 392 448 504 560 616 672 728 784 840 896 952
1008 1064 1120 1176 1232 1288 1344 Prev
Data Port Rate (appears when using the block or ACAMI channel allocation method, or when a synchronous data port is
assigned to another synchronous data port). Designates the data rate for the port. Available selections depend on the
current base rate configured for the port. The factory default for Nx64 is 384 kbps, and Nx56 is 336 kbps.
NOTES:This configuration option does not appear if the individual channel allocation method (Chan) is selected using the
Assign By configuration option.
Changing this configuration option from one rate to another deallocates all DS0 channels assigned to the
network interface.