Filter
Top Products
ACCULINK 3163 DSU/CSU
4-18 March 1999 3163-A2-GB20-10
F1
Test:
Lpbk Ptrns Lamp
F2
F3
4. From the Lamp Test screen, select Start.
F1
Lamp Test:
Abort Start
F2
F3
5. The following screens alternately appear on the
LCD until you press a Function key to return to
the Lamp Test screen. In addition, all LEDs blink.
F1 F2
F3
F1
0123456789 : ; < = > ?
@ABCDEFGHIJKLMNO
F2
F3
6. When you are satisfied that all LEDs are lighting
and the LCD is functioning properly, abort the
Lamp test from the Lamp Test screen. If there is
no activity on the DSU/CSU front panel for five
minutes, the Device Health and Status screen
appears automatically. However, the Lamp test
remains active until it is aborted.
Aborting a Lamp Test
" Procedure
To abort the Lamp test:
1. Display the Lamp Test screen. To do this when the
LCD is alternating the Lamp test screens, press
any Function key. Otherwise, follow Steps 1
through 3 for starting a Lamp test.
F1
Lamp Test:
Abort Start
F2
F3
2. From the Lamp Test screen, select Abort.
F1
Lamp Test:
Abort Start
F2
F3