Filter
Top Products
Operation
3-193163-A2-GB20-10 March 1999
Individual Channel Assignment Method
The Assign By configuration option screen appears
after you select a port.
" Procedure
To assign by the individual channel method:
1. Press the key once to bring the Chan selection
onto the screen.
F1
Assign By:Block
Next Block ACAMI
F2
F3
2. Press F3 (Chan).
F1
Assign By:Chan
Block ACAMI Chan
F2
F3
3. Press F1 (Next) to display the next configuration
option (channel allocation).
4. Line 1 displays the 24 channels for the network
interface. Line 2 displays what is allocated to the
DS0 channel shown in Line 1. Pressing the
or
key scrolls the channels onto the screen in
groups of three. Select the channel by pressing the
Function key under the desired number. Portn
appears. The port is assigned to that channel. To
deallocate a port, press the Function key under
that port number. Pressing the Function key under
channels assigned to other ports has no effect.
F1
N1 N2
Next Prt1 Prt1
F2
F3
Clearing DS0 Channel Allocation
You can clear (deallocate) all the DS0 channels
currently allocated to either the network interface or the
synchronous data port.
" Procedure
To clear DS0 channel allocation:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the
Chan selection appears on the screen.
5. Select Chan.
F1
Edit:
Port NET Chan
F2
F3
6. From the Channel Config screen, select Clear.
F1
Channel Config:
Dsply Clear Prt1
F2
F3