Filter
Top Products
Configuration Options
C-213163-A2-GB20-10 March 1999
Table C-8
(3 of 3)
Management Configuration Options
Modem Link: PPP
Next PPP SLIP Prev
Modem Port Link Layer Protocol. Specifies the link layer protocol for the modem port if the Modem Use configuration
option is set to Mgmt.
PPP – Specifies PPP as the link layer protocol for the IP management link on the modem port.
SLIP – Specifies SLIP protocol as the link layer protocol for the IP management link on the modem port. The modem port
must be configured for asynchronous operation to support SLIP.
Def Netwk: None
Next None Com Modem FDL Prev
Default Network Destination. Specifies the default network destination. This configuration option specifies where the
default network is connected. For example, if the default network is connected to the communication port, you select
Com. If the default network is connected to the far-end 31xx Series device over the FDL, you select FDL. The routing
protocol uses the default network destination to route data that does not have a specific route.
None – No default network destination. Data that cannot be routed is discarded.
Com – The default network destination is the communication port. This selection only appears if the Com Use
configuration option is set to Mgmt.
Modem – The default network destination is the modem port. This selection only appears if the Modem Use configuration
option is set to Mgmt.
FDL – The default network destination is FDL. This selection only appears if the FDL management link is enabled.
NOTE: If the chosen default network link is disabled or down, data is discarded. Return to this menu and choose another
default network.