Filter
Top Products
AT Command Set and S-Registers
5-273920-A2-GN31-30 November 1996
Table 5-3
(12 of 12)
392x
Plus
S-Registers
S-Register
DCP LCD
Command
Sequence
Description
S96 Trellis Multipoint (TMp) Tx Preemphasis. Provides amplification for
frequencies above the carrier frequency to compensate for high frequency line
attenuation.
Register has the following values:
0 = Enable
1 = Disable
The factory setting is Enable.
Configure\Edit\
Leased
S97 Reduced Asynchronous Buffer Size. Register limits the modem’s buffer size to
a maximum of 20 characters.
Register has the following values:
0 = Disable
1 = Enable
The factory setting is Disable.
Configure\Edit\
V42/MNP/Buffer
S98 Special Standby. Supports automatic dial standby when a third modem is used
for dial backup.
Register has the following values:
0 = Disable
1 = Enable
The factory setting is Disable.
Configure\Edit\
Leased