Filter
Top Products
DCP Operation
3-593920-A2-GN31-30 November 1996
To access Rem_Digital_Loop from the T
est branch, make the following selections:
F1
Test:
Rem_Digital_Loop
F2
F3
Press the
key until Rem_Digital_Loop appears. Press any function key to start this test.
F1
Pick Test Port >
Port1 Port2
F2
F3
Select the appropriate port by pressing the corresponding function key
. Press the
key to scroll
other ports into view.
This screen does not appear in Singleport mode.
F1
Test:P1:Rem Loop
Started
F2
F3
The
message
Started appears on the LCD, and the Test LED lights.
If OtherTestActive appears on the LCD, another test is in progress. Select Abort to clear the
current test and try again. If the Test Timeout configuration option is enabled, T
est T
imeout
appears at the conclusion of the test. If it is disabled, the test operates until aborted. For more
information on the Test Timeout configuration option, refer to the Test
section in Chapter 4.
To exit this function and remain in the T
est branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.