Filter
Top Products
COMSPHERE 392xPlus Modems
5-4 November 1996 3920-A2-GN31-30
Table 5-1
(2 of 2)
Result Codes
Numbers
(1)
DescriptionWord
Numbers
(2)
22 12 CONNECT 9600/ EC**** Connection at 9600 bps with error control
23 16 CONNECT 12000/ EC**** Connection at 12,000 bps with error control
24 13 CONNECT 14400/ EC**** Connection at 14,400 bps with error control
25 17 CONNECT 16800/ EC**** Connection at 16,800 bps with error control
26 15 CONNECT 7200/ EC**** Connection at 7200 bps with error control
27 5 CONNECT 1200/ EC*** Connection at 1200 bps with error control
28 28 CONNECT 38400** Connection at 38,400 bps
29 14 CONNECT 19200/ EC**** Connection at 19,200 bps with error control
30 30 CONNECT 57600** Connection at 57,600 bps
37 37 CONNECT 21600* Connection at 21,600 bps
38 38 CONNECT 24000* Connection at 24,000 bps
39 39 CONNECT 26400* Connection at 26,400 bps
40 40 CONNECT 28800* Connection at 28,800 bps
41 41 CONNECT 31200* Connection at 31,200 bps
42 42 CONNECT 33600* Connection at 33,600 bps
43 43 CONNECT 21600/ EC**** Connection at 21,600 bps with error control
44 44 CONNECT 24000/ EC**** Connection at 24,000 bps with error control
45 45 CONNECT 26400/ EC**** Connection at 26,400 bps with error control
46 46 CONNECT 28800/ EC**** Connection at 28,800 bps with error control
47 47 CONNECT 31200/ EC**** Connection at 31,200 bps with error control
48 48 CONNECT 33600/ EC**** Connection at 33,600 bps with error control
77 77
FORBIDDEN ⊗
Forbidden number
78 78
DELAYED ⊗
Delayed number
* Only appears when the Extended Result Codes configuration option is enabled.
** Only appears when the Extended Result Codes configuration option is set for Use_DTE_Rate. This displays the
DTE data rate instead of the line rate.
*** Only appears when the Extended Result Codes configuration option is set for Add/EC. If this configuration option is
set for Add/V42, MNP, then either V42b, V42, MNP5, MNP4, MNP3, MNP2, or NoEC appears.
**** Only appears when the modulation is V.34 and the Extended Result Codes configuration option is set to Add/EC or
Add/V.42. Receive Rate (RX) and Transmit Rate (TX) appear in place of the single rate.
⊗ Only appears in countries with specific dialing requirements.