Filter
Top Products
COMSPHERE 392xPlus Modems
3-30 November 1996 3920-A2-GN31-30
Select Nxt to scroll through the entries in the Service Log.
To exit this function and remain in the Status branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.
Configure Branch
The Configure branch of the LCD allows you to change and save the modem’s configuration
options. For configuration options and DCP configuration procedures, refer to Chapter 4,
DCP Configuration.
Poll List Branch
The Poll List function is not available in:
• Multipoint tributary modems.
• Modems with the Diag Connection configuration option disabled.
• Modems using modulations that do not support the secondary channel.
• Point-to-point control modems.*
The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in
order to support health and status polling and download broadcasting. The maximum number of
devices is 32 on the secondary channel and 64 on the diagnostic channel.
“Status”
Status Configure
Control
Test SubHS Call_Setup Tlk/Data Security Remote
PList
(Tributary
o
nly)
Display Clear Change Add Acquire
Active
Delete
Skip
To access PList from the Top-Level menu, make the following selections:
* Point-to-point control modems only poll address 01, and point-to-point tributary modems are always set to address 01.