Paradyne 392xPLUS Network Card User Manual


 
Modem Installation
2-93920-A2-GN31-30 November 1996
If
the Model 3921
Plus
modem is to communicate with an installed SDCP
, install the modem as
described above and perform the following steps:
1.
Press the
Select
key on the SDCP
. The Carr:Slot screen appears with the cursor on the
slot selection position (01 on the first LCD line in following screen example).
F1
Carr:Slot: 1:01A
1:01A
F2
F3
2. Press the F1 ( " ) or F2 ( # ) key until the slot number you want appears.
3. If you have more than one carrier
, press the
key to move the cursor to the carrier
selection position (1: on the first LCD line in the following screen example).
F1
Carr:Slot: 1:01A
1:01A
F2
F3
4. Press the F1 (
"
) or F2 (
#
) key until the carrier number you want appears.
The carrier number selection has a range of 1 to 8 since a single SDCP can control a
configuration of up to eight carriers. (This is only possible if the SDU is installed.)
5.
Press the
Select
key to place the SDCP in direct communication with the selected
modem.
The LCD displays the Top-Level menu for the selected modem. In addition, the Front
Panel LED on the modem’
s faceplate and the
OK LED on the SDCP light.