Filter
Top Products
Cable installation 25
Model 2616RC T-DAC User Manual 2 • Hardware installation
Figure 10. WAN cable‘s 68-pin SCSI connector
1. Connect the 68-pin SCSI connector (see figure 10) of the 6-foot WAN cable (see figure 9 on page 24) to
the connector on the rear panel of the Model 2616RC.
2. Connect the WAN cable RJ-45 connectors (see figure 11) to the corresponding ports on a patch panel or
local T1/E1 device.
Figure 11. RJ-45 plug
Table 4. RJ-45 plug pin-out
Description Pin
Transmit pair (TX) 1
Transmit pair (TX) 2
Receive pair (RX) 4
Receive pair (RX) 5