Filter
Top Products
Using a browser to complete Model 2616RC configuration 52
Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation
Enabling/disabling the alarm card
The Alarm Card window (see figure 49) is where you can configure the alarm card polling mode to determine
whether the 2616RC monitors the alarm card status for the chassis.
1. Click on Alarm Card under the configuration menu to display the Alarm Card Information window.
2. From the Alarm Card Polling Mode menu, select an option from the drop-down menu to enable/disable
the alarm card.
– doNotMonitor(0)—Disables the alarm card
– monitorAlarmCard(1)—Enables the alarm card
3. Click Submit to save the change.
Note
If the chassis contains more than one (2616RC/3096RC/3196RC) or
any combination thereof, then only one card should be enabled to
monitor the alarm card.
Figure 49. Alarm Card Information window