Patton electronic 2616RC Switch User Manual


 
Periodic maintenance 66
Model 2616RC T-DAC User Manual 5 • Troubleshooting and maintenance
Periodic maintenance
Consult the rack chassis user manual for information on preventative maintenance (such as cleaning the chassis
air cooling vents to remove accumulated dust).
Calibration
The Model 2616RC requires no calibration.
Maintenance
If you isolate a problem to the a Model 2616RC component, the entire Model 2616RC must be replaced
as
follows.
Exporting the current Model 2616RC configuration
The 2616RC T-DAC provides Import/Export functions. These functions enable you to back up (export) and
restore (import) your T-DAC’s configuration parameters against possible failure. Should your T-DAC ever
need replacing, a previously saved copy of your (exported) configuration file can quickly be loaded (imported)
into a replacement T-DAC.
Note
Import/Export functions require superuser access privileges.
Note
The parameters that will be exported are the power-up settings as they
are stored in flash memory and may not be the current operating
parameters. To ensure that you export the most current parameters,
go to HOME, then under Operator Actions, click on the Record
Current Configuration button.
1. If you already have an exported backup copy of your current configuration, go to “Removing the defective
Model 2616RC” on page 69. Otherwise, go to step 2.
2. On the Configuration Menu pane, click the Import/Export hyperlink to display the Import/Export page
(
figure 56).