Filter
Top Products
Initial configuration through the RS-232 control port 36
Model 2616RC T-DAC User Manual 3 • Configuring the T-DAC for operation
9. Connect the male end of the 2616RC T-DAC’s power cables to the power outlets.
10. Boot up information will display on your HyperTerminal connection window, eventually followed by a
login request window (see
figure 21).
Figure 21. Login window
11. For the user name, type
superuser
.
12. For the password, type
superuser
; the top level management window then appears (see figure 22).
Figure 22. VT-100 top level management window