Filter
Top Products
3. Repeat step 2 for each field except the last one.
{B,1,U,0 p
3,"BROADWAY" p }
{B,1,U,0 p
4,"555 WEST OAK AVE." p }
4. For the last field, input data and send it with the quantity of labels you
want printed. When the printer receives input for the last field, it
immediately prints the labels.
Example
{B,1,U,10 p
5,"DAYTON, OHIO" p }
Increasing Throughput
Reducing the imaging time increases throughput. You can also increase the
baud rate to increase the transmission time and increase throughput. Make
sure the communication settings at the printer match those at the host.
General Format Tips and Hints
The following tips and hints are helpful to keep in mind when designing
MPCLII formats.
With Formats
If you want to modify your format fields, check digit fields, and
configuration commands, use the optional entry method. This method
enables you to reset only the parameters you want to change. Commas
act as placeholders for unchanged parameters. The optional entry
method reduces file size and increases the speed at which files are sent
to the printer.
With Packets
Leave parameters blank that you do not need to change when sending
online configuration packets.
You can group fields with similar parameters. For example,
T,1,10,V,250,50,1,1,1,1,B,C,0,0 p
T,2,15,,,75 p
T,3,,,,100 p
7-4 Printer Optimization