Filter
Top Products
Defining Line Fields
Use lines to form borders and mark out original prices. Define each line
separately. This field is not assigned a field number, but is counted as a
field (keep this in mind, as the printer allows a maximum of 200 fields per
format). You can define any line length and a thickness up to 99 dots, as
long as the solid black print does not exceed 30 percent of any given square
inch of the label.
Line Types
You can create horizontal and vertical lines. There are two ways to define
lines.
Segments You choose the starting point and ending point.
Vectors You choose the starting point, the angle, and the length
of the line.
Syntax
L,type,row,column,angle/end row,length/
end col,thickness,"pattern" p
L1. L Line Field.
L2. type Type of line. Only vertical and horizontal lines are supported. Options:
S Segment. You choose the starting point and ending point.
V Vector. You choose the starting point, angle, and length.
L3. row Distance from bottom of print area to the starting
point.
English 0 - 365
Metric 0 - 927
Dot 0 741
L4. column Distance from left edge of the print area to line origin.
English 0 - 189
Metric 0 - 480
Dots 0 - 383
Defining Fields 2-19