Filter
Top Products
B9. height Bar code height, in 1/100 inches, 1/10 mm, or dots. Minimum values:
English 1
Metric 2
Dots 1
For Quick Response bar codes, the value you enter is the symbol’s
maximum height. Small bar codes may not be scannable.
B10. text Appearance of text with bar code. For UPC and EAN, use 1 or 5-8.For
all others, use 8. Options:
1 No check digit or number system or Quick Response Model 1
2 Quick Response Model 2
5 Number system at bottom, no check digit
6 Check digit at bottom, no number system
7 Check digit and number system at bottom
8 No text, bar code only
B11. alignment Choose L, R, C, B or E to align the bar code data correctly in the field. For
I2 of 5, Code 39 (Mod 43), Codabar, and MSI, you can use L, R, C, B or E.
For all other bar codes, use L.
B12. field rot Field rotation. Field rotation rotates the whole field, not just the characters.
Rotation is affected by the pivot point, which varies depending on how text
is justified. Lower left corner of field is the pivot point. Options:
0 Top of field points to top of supply
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply
Note: Serial bar codes printed at speeds greater than 1.5 IPS may not
scan properly.
Example B,3,12,F,150,70,1,2,80,7,L,0 p
Defines a bar code field (field #3) with 12 characters of fixed length starting
at row 150, column 70. A UPCA bar code with a density of 2 and a height
of 80 is used. The check digit and number system are s hown at the
bottom. The bar code is left aligned without any field rotation.
2-14 Defining Fields