Filter
Top Products
Example R,42,1 p
Uses a price field that prints the monetary symbol and notations as defined
in the monetary formatting packet.
Option 50 (Bar Code Density)
You can apply this option to bar code fields when you want to create custom
densities. When you apply this option, it overrides the density value in the
bar code field.
Do not use Option 50 with UPC or EAN bar codes. When using this option,
set the density parameter in your bar code field to the default value. You
can only use this option once for each bar code field. This option overrides
the density selected in the bar code field.
Bar codes produced using Option 50 may not be scannable. The additional
character gap, narrow space, and wide space parameters are valid only
with Code 39 and Codabar. If these parameters are specified for any other
bar codes, they will be ignored by the printer.
Syntax
R,50,narrow,wide,gap,nar_space,wide_space p
R1. R Field Option Header.
R2. 50 Option 50.
R3. narrow Dot width of the narrow element. Range: 1-99.
R4. wide Dot width of the wide element. Range: 1-99.
R5. gap Additional dot space between characters. Enter a value of 1-99.
(Code 39 and Codabar only. )
R6. nar_space Additional dot width of the narrow bar code space.
(Code 39 and Codabar only). Range: 1-99.
R7. wide_space Additional dot width of the wide bar code space.
(Code 39 and Codabar only). Range: 1-99.
Example R,50,4,8,4,4,8 p
Creates a custom bar code density with a narrow element of 4 dots, a wide
element of 8 dots, a gap of 4 dots, 4 additional dot widths for the narrow bar
code space, and 8 additonal dot widths for the wide bar code space (if this
is a Code 39 or Codabar bar code).
3-8 Defining Field Options