Filter
Top Products
5-6 System Administrator’s Guide
Configuring UPC/EAN Bar Codes
1. To configure UPC/EAN settings, tap UPC/EAN
from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
UPCA
Allows the scanner to scan UPCA,
UPCA+2, and UPCA+5 bar codes.
UPCE
Allows the scanner to scan UPCE
bar codes.
UPCE1
Allows the scanner to scan UPCE1
bar codes.
EAN8
Allows the scanner to scan EAN8 bar
codes.
EAN13
Allows the scanner to scan EAN13
bar codes.
3. For each bar code, decide if you want to tell the scanner to return the
check digit with the data when the bar code is scanned. Check the
Transmit CD box as necessary.
4. For each bar code, set the Preamble, which specifies the characters
that preface the returned data from a UPCA bar code. The choices
are
♦ None (No Data)
♦ SYSCHAR (System Character)
♦ SYSCOUNT (Country Code and System Character).
Note: The USA country code is 0.