Filter
Top Products
Configuring the Scanner 5-9
Configuring Code 39 Bar Codes
1. To configure Code 39 settings, tap Code 39
from the Scanner Configuration screen.
2. Enable each bar code you need to scan.
Code 39
Allows the scanner to scan
Code 39 bar codes.
Transmit
CD
Tells the scanner to return the
check digit with the data when a
Code 39 bar code is scanned.
Code32
Prefix
Allows the scanner to scan
Code 32 Prefix bar codes.
Convert to
Code32
Tells the scanner to convert Code 39 bar codes to Code
32 bar codes.
Full ASCII
Conversion
Allows the scanner to interpret data in a Code 39 bar code
as an ASCII representation. The scanner does not
autodiscriminate between Code 39 and Code 39 Full
ASCII.
Note: Do not enable this option and Trioptic Code 39 at
the same time.
Trioptic 39
Allows the scanner to scan Trioptic Code 39 bar codes.
The length is always 6.
Note: Do not enable this bar code and Code 39 Full ASCII
at the same time.
Verify CD
Tells the scanner to check the integrity of all Code 39 bar
codes that it scans.
Note: This option only works on Code 39 bar codes that
include a modulo 43 check digit.